This revision Sheet was added after the 'bulk' of the photographs/drawings
was entered.
It is intended to give a quick overview of additions and corrections.
May 22, 2015 |
602-Piston |
Two types are shown |
May 21, 2015 |
Replica Neracar piston |
Note added for casting to shrink 1 mm |
May 21, 2015 |
662-Crank Case |
Construction of engine 195, thanks to Andy Pugh. |
May 20, 2015 |
807-Headlamp acetylene |
Photo added air intake holes, thanks to Andy Pugh |
March 10, 2015 |
Balancing |
Remark added |
March 9, 2015 |
Balancing |
Correction balance % |
March 3, 2015 |
Engine balancing |
Completed |
March 1, 2015 |
938 Terminal Post, HT #2 |
Thread corrected from 4BA to 1/8” BSF |
March 1, 2015 |
Neracar Piston + Description |
Updated |
Feb 27, 2015 |
Neracar Piston
+ Description |
Completed |
Jan, 30, 2015 |
Neracar Piston + Description |
Updated |
Jan. 7, 2015 |
Balancing |
Updated |
Jan. 7, 2015 |
6-Engine Assy |
Corrections ignition data, and compression ratio thanks to Rob
Poestkoke |
Jan. 7, 2015 |
Neracar Piston + Description |
Updated |
Dec. 30,2014 |
902-Frame, Contact Breaker Assy #1 |
Two missing dimensions added |
Dec. 20, 2014 |
Balancing |
Started |
Dec. 19, 2014 |
Neracar Piston + Description |
Updated |
Dec.17, 2014 |
Neracar Piston + Description |
Updated |
Dec.12, 2014 |
9-Igniter |
Added 3 photographs of Bush, Contact Breaker |
Dec.12, 2014 |
Neracar Piston + Description |
Updated |
Dec. 5, 2014 |
Neracar Piston + Description |
Updated |
Nov. 30, 2014 |
Neracar Piston + Description |
Updated |
Nov. 27, 2014 |
Neracar Piston + Description |
Updated |
Nov. 25, 2014 |
Neracar Piston Description |
Inverted steps 2 and 3 |
Nov. 25, 2014 |
SA-500-L Twist Grip Assy Description |
Added info and link how to solder the nipples |
Nov. 22, 20154 |
The making of a Cleveland piston |
Photo’s clamp added |
Nov. 21, 2014 |
The making of a Cleveland piston |
Photographs
added to show how to make a Neracar piston, using a Cleveland
piston as an example |
Nov. 21, 2014 |
The making of a Neracar piston |
Description
‘how to make a Neracar piston’ completed, using a Cleveland
piston as an example |
Nov. 9, 2014 |
The making of a piston |
Started |
Oct. 16, 2014 |
S.A.1008 Exhaust Assy |
Dimension added |
Oct. 15, 2014 |
Ref. to sheet and wire metal thickness (SWG) entered into
Guidelines |
Thanks to Andy Pugh |
Oct. 15, 2014 |
656-Funnel |
Photo’s original Funnel added |
Oct. 15, 2014 |
S.A.1008 Exhaust Assy |
More details added |
Sept. 13, 2014 |
6-Crank Shaft and Gland Assy |
Additions |
Sept. 11, 2014 |
4-Cross Shaft Assy last photo. |
Clarified, thanks to Andy Pugh. |
Sept. 11, 2014 |
Engine description |
Modified |
Sept. 11, 2014 |
6-Crank Shaft and Gland Assy |
Added |
August 29, 2014 |
Suspension Assy |
Non-working links corrected. |
August 13, 2014 |
105-Side Reinforcement, LH, top right view |
Dimensions 4 ¾” and 3
13/16”
corrected (swapped), thanks to Miloslav Roudnicky |
August 3, 2014 |
246, Number Plate, Rear |
Correction dimension, thanks to Andy Pugh |
June 13, 2014 |
6a Carburettor |
Added to 31 Lock Pin, 7/32”BSF thanks to Andy Pugh |
June 13, 2014 |
327 Cup, Steering Ball |
Configuration and connection clarified, thanks to Andy Pugh |
April 6, 2014 |
Photograph pages |
Improved photograph arrangement for better overview. Click for
full frame. |
September 2, 2013 |
Patent list |
NEW!
Thanks to Giovanni Orlando and Joost Heesakkers |
June 12, 2013 |
602 Piston Assy |
Material corrected from aluminium to cast iron |
April 1, 2013 |
3b Rear Wheel Assy |
Spoke Dimensions ref. to 3a Front Wheel Assy |
April 1, 2013 |
3b Rear Wheel Assy |
Rear Wheel offset added |
Feb 16, 2013 |
3a Front Wheel Assy Description |
Spoke dimensions added |
Jan 6, 2013 |
809 Tail lamp |
Completed |
Dec 31, 2012 |
807 Headlamp Acetylene |
New |
Dec 30, 2012 |
249 Splash Guard |
Completed |
Nov 27, 2012 |
Frame Assy |
Corrections |
Nov 27, 2012 |
324-Front Axle Assy |
Corrections and additions |
Oct 26, 2012 |
Supplier replica Tax Discs |
Added |
Oct 13, 2012 |
Applicable Model A’s |
SN’s, Licence Nr.’s etc. added |
Oct 13, 2012 |
Model A, Licence Nr. XF9215 |
Photographs added. |
Sept 16, 2012 |
6-Engine Assy |
Correction and addition timing diagram |
Sept 1, 2012 |
6-Engine Assy |
PN’s added |
August 23, 2012 |
9-Ignition |
Update ignition and light coil |
August 23, 2012 |
Guidelines |
Updated |
July 9, 2012 |
5 Foot Brake Assy |
Adjustor added |
|
1 Suspension Assy 155 Greaser |
Dimensions corrected,
previous
dimensions
belonged to Model B |
July 9, 2012 |
500-Controls Assembly |
Excel PN list updated |
July 9, 2012 |
SA500C-Handle Bar Assy |
519/574 Grip, LH/RH added |
July 9, 2012 |
6A-Carburettor |
Excel PN list updated |
July 9, 2012 |
6A-Carburettor |
New information added |
July 6, 2012 |
Useful links |
Several suppliers added |
July 6, 2012 |
4-Cross Shaft Description |
Pig leather added as friction mtl. |
July 3, 2012 |
706-Valve (petrol) |
Photo different model added |
July 3, 2012 |
809-Tail Lamp |
Added photograph fitted Tail Lamp |
July 3, 2012 |
Questions to Visitors |
Updated (some questions have been answered) |
July 3, 2012 |
151-Stand, Front |
Correction: original used |
July 3, 2012 |
8a-Saddle Assembly Description |
Clarification on non-flipping over and correct embossment |
July 3, 2012 |
6-Foot Starter Assy |
Clarification on eccentric |
July 3, 2012 |
General |
Corrections, additions, updates |
July 3, 2012 |
Other Model A’s |
One more Model A added |
July 3, 2012 |
Description Pictorial Partslist |
More Model A’s added |
July 3, 2012 |
221 Rear Stand |
Updated for two versions |
July 3, 2012 |
6-Engine Assy |
Ignition time + spark. Plugs + correct fitting added |
June 1, 2012 |
151 Stand Front and 221 Stand Rear |
Photographs added |
May 16, 2012 |
6-Engine Timing |
added |
May 6, 2012 |
Video’s of ‘Maiden Trip’ |
added |
May 6, 2012 |
9-Lighting Switch |
4V changed into 6V |
April 16, 2012 |
804-Headlamp Electric |
Photo #24, non-original brackets removed |
April 16, 2012 |
10-Repairs and Replica’s |
809-Tail Light + Descr. NEW |
April 16, 2012 |
10-Repairs and Replica’s |
805-808-Brackets Off and Near Side + Description NEW |
April 16, 2012 |
10-Repairs and Replica’s |
804-807-Headlamps + Descr.NEW |
April 16, 2012 |
9-Igniter Lighting Switch |
Description updated |
April 16, 2012 |
9-Igniter Lighting Switch |
Wiring Diagram added |
April 16, 2012 |
3a-Front Wheel Description |
Spoke charts added |
Jan 20, 2012 |
3a-Front Wheel |
Info on beaded edge tyres added |
Jan 13, 2012 |
Assembling the Neracar |
New chapter with descr. + photo’s |
Jan 13, 2012 |
Video of starting the Neracar |
added |
Jan 13, 2012 |
Miscellaneous |
Corrections and additions |
Jan 12, 2012 |
Miscellaneous |
Corrections and additions |
Jan 07, 2012 |
Miscellaneous |
Corrections, shifts and additions |
Jan 06, 2012 |
Excel Sheet 100-Frame |
Updated |
Jan 06, 2012 |
Excel Sheet 800-Accessories |
820-Inflator
added |
Jan 06, 2012 |
202-Fuel Tank Cradle |
820-Inflator added |
Jan 06, 2012 |
246-Number Plate Rear |
251-Wing
Nut Rear Gen Clip
add |
Jan 06, 2012 |
244-Number Plate, Front |
Added |
Jan 06, 2012 |
Klaxon (Smiths) |
Added |
Dec 30, 2011 |
6-Engine Assy |
Pictures assembled eng. added |
Dec 30, 2011 |
Miscellaneous |
Additions |
Dec 30, 2011 |
715-Anchor Plate |
Dimension corrected |
Dec 25, 2011 |
Repair Starter Support |
Corrections |
Dec 25, 2011 |
SA500L-Twist Grip Assy |
Added 529-Screwed Stop and Nut |
Dec 25, 2011 |
4-Cross Shaft Assy |
Added dimensions of 529 |
Dec 25, 2011 |
105-106 Reinf’ment, Side, LH, RH |
Added threaded hole for 529 |
Dec 25, 2011 |
Drawing 500 Control Assy |
Updated |
Dec 25, 2011 |
Excel Sheet PL 500 Control Assy |
Updated |
Dec 8, 2011 |
147-152-Mat, LH, RH |
Photogr’s added, Descr updated |
Dec 8, 2011 |
Saddle Assy |
Photogr’s added, Descr updated |
Dec 8, 2011 |
Miscellaneous |
Various additions |
Nov 27, 2011 |
Questions to readers |
Updated |
Nov 21, 2011 |
103-104-Reinf’ment Rear, LH, RH |
PN’s checked and corrected |
Nov 21, 2011 |
105-106-Side Reinf’ment, LH, RH |
PN’s checked and corrected |
Nov 21, 2011 |
110-111-113-146- Footboard Assy |
PN’s checked and corrected |
Nov 21, 2011 |
147-152-Mat, LH, RH, Footboard |
PN’s checked and corrected |
Nov 21, 2011 |
151-Stand Front |
PN’s checked and corrected |
Nov 21, 2011 |
172-Gusset, Front Stand, RH |
PN’s checked and corrected |
Nov 21, 2011 |
Frame Assy |
PN’s checked and corrected |
Nov 21, 2011 |
SA1008 Exhaust Assy |
PN’s checked and corrected |
Nov 21, 2011 |
Suspension Assy |
PN’s checked and corrected |
Nov 21, 2011 |
SA500A Change Gear Assy |
PN’s checked and corrected |
Nov 21, 2011 |
2A-Steering Assy |
PN’s checked and corrected |
Nov 21, 2011 |
Repairs and Replica’s Starter |
PN’s checked and corrected |
Nov 21, 2011 |
100-Frame Assembly Excel Sheet |
PN’s checked and corrected |
Nov 21, 2011 |
2A-Steering Assy Description |
Updated |
Nov 21, 2011 |
205-Front Fender Description |
Updated |
Nov 21, 2011 |
7-Fuel Tank Assyu Description |
Updated |
Nov 21, 2011 |
204-Rear Fender Assy Description |
Updated |
Nov 21, 2011 |
221-Stand, Rear |
PN’s checked and corrected |
Nov 21, 2011 |
230-Carrier Seat |
PN’s checked and corrected |
Nov 21, 2011 |
201-Rear Fender Assy |
PN’s checked and corrected |
Nov 21, 2011 |
205-Front Fender Assy |
PN’s checked and corrected |
Nov 21, 2011 |
200-Fenders and Pans Assy Excel |
Updated |
Nov 18, 2011 |
Section “Repairs” |
Changed to “Repairs and Replica’s” |
Nov 18, 2011 |
Repairs and Replica’s |
New Metal Spinning (Headlamps) |
Nov 18, 2011 |
9-Igniter |
PN’s checked and corrected |
Nov 18, 2011 |
900-Igniter |
New Drawing |
Nov 18, 2011 |
900-Igniter |
New Excel Sheet |
Nov 18, 2011 |
822-Wire Light Switch |
Moved to 900-Ignition |
Nov 18, 2011 |
Lighting Switch |
PN’s checked and corrected |
Nov 16, 2011 |
800-Accessories |
New Excel Sheet |
Nov 16, 2011 |
804-Headlamp Electric |
PN’s checked and corrected |
Nov 16, 2011 |
809-Tail Lamp complete |
PN’s checked |
Nov 16, 2011 |
822-Wire Lighting Switch |
PN’s checked |
Nov 15, 2011 |
6a-Carburettor |
PN’s checked and corrected |
Nov 15, 2011 |
6a-Carburettor |
New Excel Sheet |
Nov 14, 2011 |
600-Engine Assembly |
New Drawing |
Nov 14, 2011 |
600-Engine Assembly |
New Excel Sheet |
Nov 14, 2011 |
6-Engine Assy |
PN’s checked and corrected |
Nov 14, 2011 |
601-Cylinder |
PN’s checked and corrected |
Nov 14, 2011 |
602-Piston Assy |
PN’s checked and corrected |
Nov 14, 2011 |
619-Compression Cock |
PN’s checked and corrected |
Nov 14, 2011 |
632-Intake Manifold |
PN’s checked and corrected |
Nov 14, 2011 |
656-Funnel |
PN’s checked and corrected |
Nov 14, 2011 |
662-Crankcase Assy |
PN’s checked and corrected |
Nov 14, 2011 |
663-Crankshaft Assy |
PN’s checked and corrected |
Nov 14, 2011 |
6-Foot Starter Assy |
PN’s checked and corrected |
Nov 12, 2011 |
SA500C Handle Bar Assy |
New
PN’s checked for correctness |
Nov 12, 2011 |
500-Controls Assembly |
New Drawing |
Nov 12, 2011 |
500-Controls Assembly |
New Excel Sheet |
Nov 11, 2011 |
Foot Brake Assy |
New
PN’s checked for correctness |
Nov 11, 2011 |
S.A.500.L. Twist Grip Assy |
New
PN’s checked for correctness |
Nov 09, 2011 |
557-558 Lever Fulcrum Assy |
PN’s checked and corrected |
Nov 09, 2011 |
S.A.500.A Change Gear Assy |
PN’s checked and corrected |
October 27, 2011 |
400-Cross Shaft Assembly |
New Drawing |
October 27, 2011 |
400-Cross Shaft Assembly |
New Excel Sheet |
October 27, 2011 |
400-Cross Shaft Assembly |
PN’s checked and corrected |
October 24, 2011 |
356-Spindle Rear Wheel Assy |
PN’s checked and corrected |
October 24, 2011 |
Brake Assy |
PN’s checked and corrected |
October 24, 2011 |
300-Wheels Assembly |
New Drawing |
October 24, 2011 |
300-Wheels Assembly |
New Excel Sheet |
October 24, 2011 |
300-Wheels Assembly |
PN’s checked and corrected |
October 23, 2011 |
3b-Rear Wheel assy |
PN’s checked and corrected |
October 22, 2011 |
330-Drag Link assy |
PN’s checked and corrected |
October 21, 2011 |
3a-Front Wheel Assy |
PN’s checked and corrected |
October 21, 2011 |
324-Front Axle Assy |
PN’s checked and corrected |
October 15, 2011 |
7-Fuel Tank Assy |
PN’s checked and corrected |
October 14, 2011 |
201-Rear Fender Assy |
New
PN’s checked for correctness |
October 14, 2011 |
Almost all parts entered |
Check on correct PN’s to follow |
October 13, 2011 |
203-Under Pan Assy |
New
PN’s checked for correctness |
October 13, 2011 |
230-Carrier, Seat |
New
PN’s checked for correctness |
October 12, 2011 |
Front Fender Assy |
New
PN’s checked for correctness |
October 12, 2011 |
202-Fuel Tank Cradle |
New
PN’s checked for correctness |
October 10, 2011 |
1447-Arrangement, side view |
Drawing,
New |
October 9, 2011 |
200-Fenders & Pans Assembly |
Drawing & Parts List New |
October 9, 2011 |
700-Fuel System Assembly |
Drawing & Parts List New |
Sep 29, 2011 |
Original Drawings |
New |
Sep 29, 2011 |
Original Parts List
(Excel retype) |
New Excel sheet |
Sep 29, 2011 |
100-Frame Assembly |
Drawing & Parts List New |
Sep 29, 2011 |
1447-Arrangement, top view |
Drawing,
New |
Sept 20, 2011 |
6a-Carburettor |
276-Clip, Carburettor Cables,
add. |
Sept 20, 2011 |
246-Number Plate |
247-Bracket, Long,
added |
Sept 20, 2011 |
246-Number Plate |
248-Bracket Short,
added |
Sept 20, 2011 |
3b-Rear Wheel Assy |
368-Lubricator,
added |
Sept 20, 2011 |
3b-Rear Wheel Assy |
357-Barrel, Rear Whl Bearing,
add. |
Sept 20, 2011 |
3b-Rear Wheel Assy |
355-Cup, Rear Wheel Bearing,
add |
Sept 19, 2011 |
110-Footboard, LH |
New |
Sept 19, 2011 |
111-Footboard, RH |
New |
Sept 19, 2011 |
113-Bracket, Brake Pedal |
New |
Sept 19, 2011 |
146-Stay, Footboard |
New |
Sept 19, 2011 |
204-Top Pan |
New
PN’s checked for correctness |
Sept 17, 2011 |
103-Reinforcement Rear, LH |
New |
Sept 17, 2011 |
104-Reinforcement Rear, RH |
New |
Sept 17, 2011 |
105-Reinforcement Side, LH |
New |
Sept 17, 2011 |
106-Reinforcement Side, RH |
New |
Sept 4, 2011 |
822-Wire Light Switch |
Added
contacts
and
cover |
Sept 4, 2011 |
7-Fuel tank |
Added
715-Anchor Plate.
Obsoleted bands and leather. |
Sept 2, 2011 |
All text changed from black to blue |
Incompatibility Windows 9.
Characters app’ed white on white.
Black char’s work, autom not. |
August 16, 2011 |
147-152-Mat, LH, RH |
Raw material
added.
Currently
available
as new item.
Thanks to Manfred Schlottau. |
August 15, 2011 |
2b-246-Number Plate, Rear |
Picture
acetylene generator
added |
August 10, 2011 |
2b-246-Number Plate, Rear |
Correction dimensions to match.
Rivets added |
August 9, 2011 |
2b-246-Number Plate, Rear |
New
(Thanks to Paolo Orlando) |
August 2, 2011 |
Saddle Assembly |
Terminology improved |
August 1, 2011 |
6-Starter |
Addition made |
July 31, 2011 |
3b-Rear Wheel Assy |
Corrections and additions |
July 31, 2011 |
110-111-Foot Board, LH, RH |
Changed to 147-152-Mat, LH, RH |
July 30, 2011 |
3a-Front Wheel Assy |
Spoke
configuration and dimensions added |
July 30, 2011 |
3b-Rear Wheel Assy |
Spoke
configuration and dimensions added |
June 22, 2011 |
656-Funnel |
New |
June 16, 2011 |
809-Tail Lamp |
Correction and additions |
|
|